Movement
Panels run horizontally on rollers; fixed and moving panels follow the elevation.
FANTANCY HOUSE / FOSHAN · CHINA
Custom Aluminum Sliding Glass Doors
Sliding glass panels with thermal-break frame options subject to the selected series. Whole-assembly thermal and condensation performance requires evidence for the frame, glass, seals and installation.
What This System Is
Sliding glass panels with thermal-break frame options subject to the selected series. Whole-assembly thermal and condensation performance requires evidence for the frame, glass, seals and installation.
- Panels run horizontally on rollers; fixed and moving panels follow the elevation.
- Two- or three-track options depend on the selected frame family.
How It Opens / Works
Tracks
Two- or three-track options depend on the selected frame family.
Thermal break
Available thermal-break profiles use a non-metal separation between inner and outer aluminum.
Materials & Construction
Configurations are selected for project requirements; specifications vary by system and order.
| Movement | Panels run horizontally on rollers; fixed and moving panels follow the elevation. |
|---|---|
| Tracks | Two- or three-track options depend on the selected frame family. |
| Thermal break | Available thermal-break profiles use a non-metal separation between inner and outer aluminum. |
| Running gear | Rollers, retention and adjustment are selected for panel weight. |
| Threshold | Sill height, drainage, access and exposure must be resolved together. |
| Glazing | Low-E IGU or safety glazing options are matched to frame capacity and the project brief. |
Configuration Options
Confirm the combination as one ordered assembly.
- Overall opening, panel count and moving/fixed layout.
- Track count, clear opening and sill/drainage interface.
- Glass build, finish, quantity and destination.
Detail Gallery
Product and sample views for discussing the relevant construction.
What to Confirm for Your Project
Send the installation conditions and target requirements with your drawings. Performance, safety and approval documents must cover the exact assembly being supplied.
- Overall opening, panel count and moving/fixed layout.
- Track count, clear opening and sill/drainage interface.
- Glass build, finish, quantity and destination.
Buyer FAQ
How can I tell a real thermal-break door from a normal sliding door?
Look at the frame section: a thermal-break frame has a visible non-metal strip separating the inner and outer aluminum. A non-thermal frame has a continuous aluminum heat path; standard sliding is an operating mechanism and may be supplied in different thermal frame families. The section drawing for the quoted series is the reliable check.
Does thermal break stop condensation completely?
It reduces the cold bridge through the frame, which is where condensation usually starts. Condensation also depends on glass performance, indoor humidity, ventilation and installation, so thermal break alone is not a guarantee.
What is the lowest threshold available?
Low and flush thresholds exist for the series that supports them, but the lower the sill the less water depth it can handle. For exposed sites a raised sill with a drainage chamber is the safer detail.
Can the panels be very large?
Panel size is limited by roller capacity, glass weight and the structural behaviour of the frame. Send the panel sizes and we will confirm which series and hardware can carry them.
Related technical guidance
Send Drawings for Review
Send your opening schedule, destination and configuration priorities for a factory quotation.